RECALLING MEMORIES
To recall saved memory settings, press
press
or
Press
again to return to the VFO mode. (See "Selecting Fre-
MR
quencies (Direct Tuning)" on Page 23.)
CLEARING A SINGLE MEMORY
Follow these steps to clear any single memory location.
1. Press
.
MR
2. Repeatedly press
location.
3. Press
FUNC
flash.
4. Hold down
clears and ------ appears to confirm that the location is
empty.
5. Press
MR
Note: To clear all memory locations, see "Resetting the HTX-
200" on Page 44.
30
to select the desired memory location.
and the last used memory location appear.
MR
or
+
. The selected memory location and
MR
for several seconds. The memory location
FUNC
to exit the memory mode.
so
MR
MR
to select the desired memory
appears. Then
MR