Setting A Memory Location To Always Skip During Scanning - Radio Shack HTX-200 Owner's Manual

Setting A Memory Location to Always Skip
During Scanning
The HTX-200 is preset to include all memory locations (except
empty locations) during memory scanning . Follow these steps
to set the transceiver to have it always skip (or resume scanning)
a specific location during scanning.
1. Press .
MR
2. Repeatedly press
location.
3. Press
FUNC
flash.
4. To set the HTX-200 to skip the memory location, press
then press
To include the displayed location during scanning, press
or so
SCSP oF
5. When you finish, press
setting.
and the last used memory location appear.
MR
or
+ . The selected memory location and
MR
or so
SCSP ON
appears.
SC
to select the desired memory
(scan skip) appears.
again, then press
MR
SC
to store the
PTT
33
,