Scanning Operation; Scanning For Active Frequencies; Using Scan Delay; Scanning Standard Memory Locations - Radio Shack HTX-200 Owner's Manual

Mini handheld two-meter fm amateur transceiver
Table of Contents

Advertisement

SCANNING OPERATION

SCANNING FOR ACTIVE FREQUENCIES

1. To search for activity on a frequency, press
ceiver begins to scan up or down the full frequency range,
and it stops on each active frequency for the duration set by
the scan delay option (see "Using Scan Delay" on Page 32).
2. To change the scanning direction, press
3. To stop on a frequency or to stop scanning completely,
press
SC

Using Scan Delay

If the HTX-200 stops on a signal during scanning, then that signal
stops, the scan delay feature delays the continuation of scanning
to allow time for the signal to restart. Access the Main Menu (see
"Using the HTX-200's Menus" on Page 16) to set the value. With
and the current delay time shown, press
Sd
new delay time (between 1 and 30 seconds).
SCANNING STANDARD MEMORY
LOCATIONS
1. Press
MR
scans all locations except empty locations and the ones you
programmed to be passed during scanning.
2. To change the scanning direction, press
3. To stop scanning, press
32
again.
appears), then press
(so
MR
again.
SC
. The trans-
SC
or
.
or
to select the
. The transceiver
SC
or
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Htx-40019-1102

Table of Contents