CONNECTING THE ANTENNA
Place the threaded base socket of the supplied antenna over the
antenna connector on top of the transceiver and turn the antenna
clockwise to tighten it . Turn it clockwise to remove it.
Caution: Do not over-tighten the antenna
Note: You can connect an external antenna to the HTX-200 using
an SMA-to-BNC adapter. This adapter, as well as suitable anten-
nas, are available through your local RadioShack store.
ATTACHING THE BELT CLIP
Use a Phillips screwdriver and the two supplied screws to attach
the supplied belt clip to your transceiver. Do not overtighten the
screws.
13