Memory Operation; Storing A Transmit/Receive Frequency - Radio Shack HTX-200 Owner's Manual

MEMORY OPERATION

Your HTX-200 has 30 standard memory locations that you can
use to store frequencies for quick access. For each memory loca-
tion, you can also store other settings such as the repeater offset,
CTCSS tones, and frequencies to pass or lock out during scan-
ning.
STORING A TRANSMIT/RECEIVE
FREQUENCY
1. Press
MR.
2. Repeatedly press
location. ------ appears if the memory location is empty.
3. Press
FUNC
flash.
4. Select the desired frequency by repeatedly pressing
or , or use direct frequency entry to select a frequency.
5. To enter a frequency offset for repeater operation, press
+
FUNC SC
calling frequency. Then press
offset. Press
6. Press
FUNC
remove an offset for simplex operation, set the repeater off-
set to
0.0
7. If desired, set the tone squelch settings (see "Continuous
Tone Coded Squelch System Features" on Page 35).
8. Press
PTT
memory mode.
and the last used memory location appear.
MR
or
+ . The selected memory location and
MR
. The HTX-200 displays the current offset for the
to store your setting.
PTT
+ to select the offset direction (+ or –). To
REV
.
to store all settings, then press
to select the desired memory
or to select the desired
MR
to exit the
MR
29