Tone Paging; Sending Paging Tones - Radio Shack HTX-200 Owner's Manual

TONE PAGING

You can set the HTX-200 to sound an alert tone when it receives
a transmission that includes the currently set subaudible receive-
tone (or any transmission, if the receive-tone or the tone feature
is set to off). Turn off the radio, then press
HTX-200 on again.
The first time the HTX-200 receives a transmission that matches
the current CTCSS settings, it sounds the selected alert tone,
then turns off the tone paging feature. To turn the feature back on,
turn the power off then on again while holding down
Follow these steps to change the alert tone.
1. Select the VFO mode. (See "Selecting Frequencies (Direct
Tuning)" on Page 23.)
2. Hold down
number from
3. Repeatedly press either
ferent tones. If key tone is enabled, each tone sounds as
you select its number.
4. Press
PTT

SENDING PAGING TONES

To transmit the selected paging tone, press
.
PTT
appears.
and press
FUNC
to appear. Release
1 5
to store your selection and exit the menu.
( ) four times.
T.SET
FUNC
or to step through the five dif-
while you turn the
.
and a
MEL
.
while pressing
37