On A Wall Plate Or Wall - Radio Shack ET-1125 Owner's Manual

3. Route the adapter's cord through
the strain relief slot on the base.
4. Plug the modular cord's other end
into the phone jack.
5. Plug the adapter into a standard AC
outlet.
6. Lift the base's antenna to a vertical
position.

On a Wall Plate or Wall

1. Plug one end of the supplied short
modular cord into the
on the back of the base as in "On a
Desk, Shelf, or Table," Step 1, on
Page 6.
2. Insert the supplied AC adapter's
barrel plug into
DC IN 9V
Desk, Shelf, or Table," Step 2, on
Page 6.
3. Route the adapter and modular
cords through the grooves on the
base.
4. Plug the modular cord's other end
5. Plug the adapter into a standard AC
jack
TEL LINE
6. Press and lift out the handset hold-
as in "On a
into the wall plate jack, then align
the base's keyhole slots with the
wall plate studs and slide the base
downward to secure it.
outlet.
er. Rotate it 180°, then snap it back
into place so it holds the handset.
7