Caller Id Operation; Reviewing Caller Id Records - Radio Shack ET-1125 Owner's Manual

CALLER ID OPERATION

If you subscribe to Caller ID service from
your phone company, the phone compa-
ny sends information about the call, as
well as the time and date, between the
first and second rings of every call you
receive.
The phone displays this information af-
ter the second ring, and it stores up to
50 Caller ID records for later review. It
also shows if caller information is un-
available or if the name and number
were blocked by the caller (see "Caller
ID Messages" on Page 20).
If you subscribe to Call Waiting with
Caller ID, you will hear a tone through
the handset when a call comes in, then
the Caller ID record appears. If you want
to answer the incoming call, press
. To resume the previous phone
FLASH
conversation, press
FLASH
If the phone's Caller ID memory be-
comes full, any new call replaces the
oldest call's record.
REVIEWING CALLER
ID RECORDS
To review the Caller ID records, lift the
handset and press
of new Caller ID records, if any, and the
total number of records appear.
Note: If the handset is faceup on the
base, it shows the number of Caller ID
records, so you can see if you have new
records to review.
Repeatedly press
through the Caller ID records from the
newest to the oldest, or
scroll back through the records. To scroll
quickly through the records, hold down
VOL/CID
When you scroll past the last record, to-
again.
tal record number appears, then the first
record. When you scroll past the first
record, the total record number appears,
then the last record.
The top line of each record shows the
date, time and the number of calls from
that number. The second line shows the
caller's name, and the third line shows
the caller's phone number.
To exit the Caller ID record display,
press
. The number
CALL ID
VOL/CID
VOL/CID
or .
.
CALL ID
to scroll
to
19