Table of Contents
Advertisement
MAKING AND RECEIVING
CALLS
To make a call, lift the handset and
press
.
Talk
and the current vol-
TALK
ume setting (see "Adjusting the Handset
Volume") appear on the handset's dis-
play, and the CHARGE/IN USE indicator
on the base lights. Then dial the num-
ber. The number displays on the hand-
set as you dial, then (after a few
seconds) the call's elapsed time dis-
plays.
You can also dial the number before you
press
.
TALK
If you make a mistake, press
until the incorrect entry is erased, then
enter the correct number. To delete the
entire number, hold down
least 2 seconds.
When you receive a call,
appears on the display. To an-
Call
swer it, lift the handset from the base
and press
. If auto talk is on, just lift
TALK
the handset from the base. If the hand-
set is away from the base, press any
key.
and the current volume set-
Talk
ting appear on the display.
To end a call, place the handset on the
base or press
.
TALK
14
SELECTING THE
CHANNEL
The phone has 20 channels. If the call
seems to disconnect for no reason dur-
ing a call, press
handset to select a different channel.
The display shows
phone searches for a clear channel.
ADJUSTING THE
HANDSET VOLUME
To adjust the volume of the sound you
CHARGE/
IN USE
hear through the handset during a call,
press
until you obtain the desired volume lev-
el.
Volume Maximum
Volume Medium
displays on the handset.
Once you set the volume level, the set-
ting is maintained even after you hang
up the phone.
DELETE
Note: When you press
the volume is maximum or
for at
DELETE
volume is low, the setting does not
change and an error tone sounds.
Incoming
USING REDIAL
You can quickly dial any of the last three
numbers you dialed recently. Lift the
handset and repeatedly press
PAUSE
displays. Then press
phone dials the number.
CH/SELECT
Scanning
or
on the handset
VOL/CID
,
Volume High
, or
Volume Low
VOL/CID
until the number you wish to dial
TALK
on the
as your
,
while
while the
REDIAL/
and the
Advertisement
Table of Contents
