Chain-Dialing Service Numbers; Testing Stored Emergency Numbers; Using A Headset - Radio Shack ET-1125 Owner's Manual

You can also dial a memory number af-
ter pressing . Press
TALK
play does not change but the phone's
memory recall activates) then enter a
memory location number.

Chain-Dialing Service Numbers

For quick recall of numbers for special
services (such as bank-by-phone), store
each group of numbers in its own mem-
ory location.
Dial the service's main number first.
Then, at the appropriate place in the
call, press and enter the number
MEM
for the location where the additional in-
formation is stored.
Testing Stored
Emergency Numbers
If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.

USING A HEADSET

You can make or answer calls with
hands-free convenience using an op-
tional headset that has a
mm) plug. Contact your local Ra-
dioShack store for a suitable headset.
18
To connect the headset, pull open the
(the dis- rubber cover marked
MEM
the handset, then insert the headset's
plug into the jack.
Notes:
• Connecting a headset disconnects
•
• If you place the handset on the base
• With a headset connected, you can
• You can use a handset holder (avail-
• When you finish using the headset,
3
/ -inch (2.5-
32
on the side of
the handset's earpiece and micro-
phone.
or on the handset al-
VOL/CID
so controls the headset's volume.
to recharge it while the headset is
connected, be sure the handset
seats properly.
make or answer calls as usual using
the keys on the handset.
able from your local RadioShack
store) to hang the handset on your
belt for greater convenience.
disconnect it from the handset and
close the rubber cover to protect the
jack.