Table of Contents
Advertisement
Editing or Deleting
a Number in Memory
Follow these steps to edit or delete a
memory number.
1. Lift the handset.
2. Hold down
MEM
Store
and a list of memory loca-
tion numbers appear on the display.
3. Choose a memory location (
by pressing a number or by repeat-
edly pressing
VOL/CID
4. Press
CH/SELECT
with the three options listed below.
Press
VOL/CID
the desired option then press
to choose it.
SELECT
Edit Memory nn
record as described in Steps 5
through 8 of "Storing a Number and
Name in Memory" on Page 16.
Delete Memory nn
prompts you to confirm the deletion.
Press
VOL/CID
sor to
, then press
Yes
or
. The phone beeps, and
DELETE
Memory nn Deleted
Go Back
— returns you to the list of
memory numbers.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
until
Memory
–
)
01
20
or
.
. A menu appears
or
to highlight
CH/
— edit the
— the display
to move the cur-
CH/SELECT
appears.
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press
. The display shows
PAUSE
entry. You can add more pause entries
for a longer pause.
Reviewing Memory Numbers
To review your memory numbers, press
. The list of memory location num-
MEM
bers (
–
) appears with the name
01
20
stored with each number (or
nn>
if you did not store a name).
To see the stored phone numbers, press
. An arrow to the right of the number
#/
means it is longer than 13 digits. Press
again to see the rest of the number.
#/
Repeatedly press
/
name display.
To exit the memory number list, press
.
MEM
To see a stored name and phone num-
ber at the same time, press
when the cursor is by a memory location
number. To exit this display, hold down
until the display clears.
DELETE
Dialing a Memory Number
To dial a number stored in memory, lift
the handset and press
memory location numbers appears.
Choose a memory location (
pressing a number or by repeatedly
pressing
VOL/CID
.
TALK
REDIAL/
for pause
P
<Memory
to return to the
CH/SELECT
. The list of
MEM
01
–
20
) by
or
, then press
17
Advertisement
Table of Contents
