Table of Contents
Advertisement
43-3502.fm Page 11 Wednesday, December 1, 1999 8:54 AM
OPERATION
MAKING AND RECEIVING
CALLS
Before using the phone, put the headset
on and adjust it as needed. Then set
to
.
POWER
ON
To make a call, press
You hear a dial tone and the TALK/LOW
BATT indicator lights. Dial the number
you want to call.
To disconnect a call, press
or place the keypad on the base.
UP
To answer a call when the keypad is on
the base, pick up the keypad. The TALK/
LOW BATT indicator lights.
To answer a call when the keypad is not
on the base, press
TALK/HANG UP
TALK/LOW BATT indicator lights.
Notes:
.
TALK/HANG UP
TALK/
HANG UP
TALK/HANG
. The
• To
conserve
battery
to
when the remote key-
POWER
OFF
pad is away from the base. When you
hear another phone on the same line
ring, set
to
POWER
to answer the call.
TALK/HANG UP
• When you press a button, a single
tone indicates that the phone accepts
the command. Three tones indicate
that you pressed a button in error, you
are out of range, or there is too much
interference. If there is severe inter-
ference, move the remote keypad
closer to the base before you press
any key.
• If interference is severe, the remote
keypad might lose communication
with the base and the call might dis-
connect. This does not happen often,
but if it does, return the remote key-
pad to the cradle for a few seconds.
power,
set
and press
ON
11
Advertisement
Table of Contents
