Telephone Operation; Making And Receiving Calls; Changing The Channel; Using Redial - Radio Shack TAD-1017 Owner's Manual

43-776.fm Page 15 Friday, August 13, 1999 3:34 PM

TELEPHONE OPERATION

MAKING AND
RECEIVING CALLS
To make or answer a call, lift the hand-
set. Or, if the handset is off the base,
press . The TALK/BATT LOW in-
TALK
dicator on the handset and the IN USE
indicator on the base light.
To end a call, place the handset on the
base or press
TALK
Note: If you press
and the phone does not disconnect,
press again while holding the
TALK
handset closer to the base or place
the handset on the base.
CHANGING THE
CHANNEL
If you notice interference, static, or
noise during a call, press
on the handset to find a clearer chan-
nel.
on the handset.
to hang up
TALK
(channel)
CH
The TAD-1017 changes to a different
channel each time you press
Note: If the handset is too far from the
base, the channel might not change.
Move closer to the base and try again.

USING REDIAL

lets you dial the last number
REDIAL/P
dialed. When you hear a dial tone, sim-
ply press .
REDIAL/P
Notes:
• The redial memory holds up to
32 digits, so you can redial long-
distance as well as local num-
bers.
• The redial memory also holds
pause entries (see "Entering a
Pause" on Page 18).
• The redial memory does not store
a flash entry or any digits you
press after
FLASH
Flash" on Page 16).
.
CH
(see "Using
15