Fixing Displacement Drive Unit - Canon imagerunner C5180 Service Manual

Chapter 11

11.5.5 Fixing Displacement Drive Unit

11.5.5.1 Preparation for Removing the Belt
Displacement Control Motor Unit
1) Remove the fixing drive unit.(page 11-
32)Reference[Removing the Fixing Drive Unit]
2) Remove the fixing assembly.(page
33)Reference[Removing the Fixing Assembly]
3) Remove the
40)Reference[Removing the IH Unit]
11.5.5.2 Removing the Belt Displacement
Control Motor Unit
1) Move the harness guide [3].
- 2 connectors [1]
- 2 screws [2]
[1]
[2]
[2]
F-11-54
2) Remove the connector [1].
[1]
F-11-55
11-42
11-
IH unit.(page 11-
[3]
[2]
3) Free the harness from the harness guide [2].
- 2 connectors [1]
[2]
[1]
F-11-56
4) Remove the harness guide [1] (Move it to the side,
and detach it by freeing it from the pin).
F-11-57
[1]