Duplex Registration Clutch - Canon imagerunner C5180 Service Manual

4) Remove the lower guide plate [2].
- 2 screws [1]
F-10-230
5) Remove the sensor support plate [3].
- connector [1]
- screw [2]
F-10-231
6) Remove the duplex pickup sensor [1].
F-10-232

10.10.44 Duplex Registration Clutch

10.10.44.1 Preparation for Removing the
Duplex Registration Clutch
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
38)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
3) Lift the duplexing open/close guide [3] in the
direction of [A] and shift it in the direction of [B].
Then, remove it.
- 1 connector [2] (Open sheet [1].)
[A]
[B]
[1]
[2]
F-10-233
Chapter 10
[3]
10-89