Canon imagerunner C5180 Service Manual page 463

Chapter 11
The fixing assembly activating the full displacement temporary escape mode is the one that is not correctly
controlled (full displacement occurs). Display 'The fixing unit has little lifetime left. Please inform it to the
responsible servicing person', which is the message when the fixing assembly reached its lifetime, to urge
replacement.
The message displayed when the fixing assembly reaches its lifetime is same as the one displayed on the control
panel when executing the full displacement temporary escape mode.
There is an alarm code to distinguish the above two cases.
06-0002 Fixing assembly belt lifetime alarm (Occurred when belt displacement occurred)
06-0004 Fixing assembly belt lifetime alarm (Occurred when torque was increased)
The cause can be identified by seeing Service Mode > COPIER > ALARM-2.
11-26
No
Yes
No
Yes
No
Yes
F-11-15
E007-0001
E007-0002