Canon imagerunner C5180 Service Manual page 817

Chapter 20
MEMO:
If the system software version in the USB memory is older or the same when starting the download, the message
to confirm overwriting is displayed. By following the display on the control panel, press key.
[0]: Overwrite / Keys other than [0]: Not to overwrite
5) The download status is displayed on the control panel during download. When download is completed, the
message prompting to press key is displayed, so press any key. In case of the normal mode, the shutdown
sequence is activated.
6) When the message prompting to turn OFF the power supply, turn OFF the main power switch. Then, remove
the USB memory and turning ON the main power switch.
7) After the machine is started, writing to the system area in HDD or the Flash ROM is started. Once the writing
to HDD is completed, the message prompting to turn OFF/ON the power supply is displayed, so turn OFF/
ON the main power switch.
20-38
F-20-54
F-20-55
F-20-56