Displayed Messages - Fisher & Paykel EB60 User Manual

Automatic bean to cup coffee machine
Hide thumbs Also See for EB60:
Table of Contents

Advertisement

DISPLAYED MESSAGE
FILL TANK WITH
FRESH WATER
INSERT WATER TANK
EMPTY GROUNDS
CONTAINER
INSERT GROUNDS
CONTAINER
Back
ADD PRE-GROUND
COFFEE, COFFEE
MAX. 1 MEASURE

DISPLAYED MESSAGES

POSSIBLE CAUSE
Insufficient water
in the tank.
The tank is not
correctly in place.
The grounds
container is full.
After cleaning, the
grounds container
has not been
re-inserted.
The 'pre-ground
coffee' function
has been selected
without placing any
pre-ground coffee
in the funnel.
The pre-ground
coffee funnel is
clogged.
WHAT TO DO
Fill the tank with water and ensure that
it is inserted correctly, pushing it as far
as it will go until it clicks into place.
Insert the tank correctly and press as
far as it will go.
Empty the grounds container and
drip tray, clean and place it back in
the appliance. Note: when removing
the drip tray, the grounds container
must be emptied, even if it contains
few grounds. If this is not done, when
you make the next drinks, the grounds
container may fill up more than
expected and clog the machine.
Remove the drip tray and insert
the grounds container.
Place pre-ground coffee in the
funnel and repeat delivery.
Empty the funnel as described in
section 'Cleaning the pre-ground
coffee funnel.'
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents