Fisher & Paykel EB60 User Manual page 18

5
INSERT GROUNDS CONTAINER AND DRIP TRAY: insert the drip tray complete
with grounds container.
6
PLACE 2L CONTAINER UNDER SPOUTS, PRESS OK TO START: position a container
under the coffee spouts and hot water spout. Press
7
RINSING UNDERWAY, PLEASE WAIT: the appliance performs a rinse cycle from the
coffee spouts. Do not leave the appliance unattended while hot water is being delivered.
8
EMPTY WATER TANK: extract the tank and empty it completely, then press.
9
(If the filter is installed) REMOVE WATER SOFTENER FILTER: remove the filter from
the tank. Press NEXT.
!0
INSERT WATER TANK, PRESS OK TO CONTINUE: insert the water tank and press
!1
WATER CIRC. EMPTYING UNDERWAY: wait for the appliance to empty the circuit.
As the water circuit empties, the appliance could become noisy. This is part of normal
operation. Do not leave the appliance unattended while hot water is being delivered.
!2
EMPTY DRIP TRAY: remove, empty and reposition the drip tray, then press NEXT.
!3
EMPTYING COMPLETE: press
Note: when turned on again, the appliance asks for the circuit to be filled.
!4
WATER CIRCUIT EMPTY PRESS OK TO START FILLING PROCESS. Place a container
under the spouts.
!5
Press the appliance will deliver water from the spout and then turn off.
Default values
This resets all menu settings and programmed quantities back to the default settings
(with the exception of the language which remains as set).
To reset the default values:
1
Press .
2
Press or
3
Press RESET ALL to reset all of the user profiles or alternatively select an individual profile.
4
RESET DEFAULT VALUES: press
5
DEFAULT VALUES RESET: Press
Statistics
This function displays statistics relating to the appliance, including:
The number of drinks that have been prepared.
●
Amount of water that has been delivered.
●
Total descales performed.
●
Container cleans performed.
●
Number of water filters used.
●
To display the statistics, relating to the appliance:
1
Press .
2
Press or
3
Press to view all the available statistics by pressing
4
Press BACK to go back to the main screen.
16
MENU SETTINGS
.
until DEFAULT VALUES appears on the display. Press
until STATISTICS appears on the display.
.
to confirm or BACK to cancel.
or BACK to go back to the home screen.
.
or .
.