Fisher & Paykel EB60 User Manual page 42

DISPLAYED MESSAGE
ADD COFFEE, COFFEE
MAX. 1 MEASURE
Back
FILL BEANS
CONTAINER
Back
GROUND TOO FINE.
ADJUST MILL 1 CLICK
WHILE IN OPERATION
Back
SELECT A MILDER
TASTE OR REDUCE
PRE-GROUND COFFEE
QUANTITY
40
DISPLAYED MESSAGES
POSSIBLE CAUSE
A long coffee
with pre-ground
coffee has been
requested.
The coffee beans
have run out.
The grinding is
too fine and the
coffee is delivered
too slowly or
not at all.
If you're using a
water softener filter ,
an air bubble may
have been released
inside the circuit,
obstructing delivery.
Too much coffee
has been used.
WHAT TO DO
Place pre-ground coffee in the
funnel and press
and complete delivery.
Fill the beans container.
Repeat coffee delivery and turn the
grinding adjustment dial one click
clockwise towards '7' while the coffee
mill is in operation. If after making at
least two coffees, delivery is still too
slow, repeat the correction procedure,
turning the grinding adjustment dial
another click until delivery is correct
(see section 'Adjusting the coffee mill').
If the problem persists, make sure the
water tank is fully inserted.
Deliver some water through the
hot water spout until the flow
becomes regular.
Select a milder strength by
pressing STRENGTH
the quantity of pre-ground coffee
(maximum 1 measure).
to continue
or reduce