Fisher & Paykel EB60 User Manual page 44

DISPLAYED MESSAGE
PRESS OK TO START
CLEANING PROCESS
OR TURN MILK FROTH
ADJUSTMENT DIAL
Back
TURN DIAL TO <CLEAN>
POSITION TO START
CLEANING
TURN THE MILK FROTH
ADJUSTMENT DIAL TO
MILK POSITION
Back
DESCALING NEEDED
PRESS OK TO START
(~45min)
Back
REPLACE WATER
FILTER PRESS OK
TO START
42
DISPLAYED MESSAGES
POSSIBLE CAUSE
The milk container
has been inserted
with the froth
adjustment dial in
the CLEAN position.
Milk has been
delivered recently
and the tubes
inside the milk
container must
be cleaned.
The milk container
has been inserted
with the froth
adjustment dial in
the CLEAN position.
The machine must
be descaled.
The water softener
filter is exhausted.
WHAT TO DO
To proceed with the CLEAN function,
press or turn the froth adjustment
dial to one of the milk positions.
Turn the froth adjustment dial
to CLEAN.
Turn the dial to the required
froth position.
Press to start descaling or BACK
to descale later. The descaling
procedure described in section
'Descale' needs to be performed.
Press to replace or remove
the filter, or BACK to carry out the
procedure later. Follow the instructions
in section 'Water softener filter'.