Fisher & Paykel EB60 User Manual page 13

Turning the appliance on
IMPORTANT!
During rinsing, a little hot water comes out of the coffee spouts and is collected
in the drip tray underneath. During this cycle, keep hands clear of the spout to avoid
contact with the water.
Note:
Before turning the appliance on, make
●
sure the main switch is pressed.
Each time the appliance is turned on,
●
it performs an automatic preheat and
rinse cycle which cannot be interrupted.
The appliance is ready for use only after
●
completion of this cycle.
Turning the appliance off
Whenever the coffee maker is turned off after being used, it performs an automatic
rinse cycle.
IMPORTANT!
During rinsing, a little hot water flows from the coffee spouts. Keep hands clear
●
of the spout to avoid contact with the water.
Never press the main switch while the appliance is on or in stand-by mode.
●
1
To turn the appliance off, press
2
The message TURNING OFF, PLEASE
WAIT will appear on the display.
The appliance will perform a rinse cycle
and then go into stand-by mode.
FIRST USE
1
To turn the appliance on, press
The message HEATING UP UNDERWAY
PLEASE WAIT will appear on the display.
2
When heating is complete, the message
changes to: RINSING UNDERWAY, HOT
WATER FROM SPOUTS. As well as
heating the boiler, this also heats the
internal circuits by circulating hot water.
3
The appliance is ready to use when the
home screen appears on the display.
3
Press the main switch at the side of
.
the appliance.
4
To ensure that cleaning message prompts
appear on the display as scheduled, we
recommend leaving the coffee maker in
stand-by mode. If you will not be using
the coffee maker for an extended period,
turn the appliance off by pressing the
main switch.
.
11