Touch Up Any Damaged Paintwork - Siemens SIMOTICS M-1PH818 Operating And Installation Instructions

Main motors
Table of Contents

Advertisement

Motor-specific sensor module
The Sensor Module contains motor-specific and sensor-specific data and an electronic
nameplate.
If you operate a different Sensor Module on the motor, this can result in serious injury or
death, or cause considerable material damage.
Only operate the sensor module on the original motor. Do not install the sensor module on
other motors. Do not replace the sensor module with a sensor module from a different motor.
9.3.14

Touch up any damaged paintwork

If the paint is damaged, it must be repaired in order to protect the unit against corrosion.
Note
Paint system
Contact the Service Center (Page 161) before you repair any paint damage. They will provide
you with more information about the correct paint system and methods of repairing paint
damage.
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
WARNING
Maintenance
9.3 Repair
131

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simotics m-1ph828Simotics m-1ph822

Table of Contents