Figure 9-1 Flat Grease Nipples And , Schematic Representation For Types 1Ph818. And 1Ph822; ① And ② , Schematic Representation For Types 1Ph818. And 1Ph822 - Siemens SIMOTICS M-1PH818 Operating And Installation Instructions

Lubricating using the regreasing system
A flat grease nipple in accordance with DIN 3404, size M10x1, is provided at both the DE
and the NDE
1. Clean the grease nipples at the DE and NDE.
2. Press in the type and quantity of grease specified (see lubrication instruction plate). The
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
②
for regreasing.
shaft rotates so that the new grease is evenly distributed throughout the bearing.
The bearing temperature initially increases noticeably. After the excess grease has been
displaced out of the bearing, the temperature will return to the normal value.
Figure 9-1 Flat grease nipples
1PH822.
① ②
and , schematic representation for types 1PH818. and
Maintenance
9.2 Inspection and maintenance
①
115