Table of Contents
Advertisement
NOTICE
Bearing damage
The bearing insulation must not be bridged. Bearing currents can damage bearings.
● Also when performing subsequent installation work, e.g. installing an automatic lubrication
● Contact your Service Center, if necessary.
See also
Service and Support (Page 161)
SIMOTICS M-1PH8 1PH818., 1PH822., 1PH828.
Operating Instructions 10/2017
system or a non-insulated vibration sensor, ensure the bearing insulation is not bridged.
Preparations for use
4.14 Converter operation
47
Advertisement
Table of Contents
