Figure 153 Enable RSTP Command Example
ras(config)# spanning-tree 10
ras#
40.6 Configuration File Maintenance
This section shows you how to backup or restore the configuration file on the switch using
TFTP.
40.6.1 Backing up Configuration
Syntax:
where
<ip>
<remote-file>
This command backs up the current configuration file on a TFTP server. The following
example backs up the current configuration to a file (
(
172.23.19.96
Figure 154 CLI: Backup Configuration Example
ras# copy running-config tftp 172.23.19.96 test.cfg
Backuping
.
(683)Bytes Done!
ras#
40.6.2 Restoring Configuration
Syntax:
where
<index>
<ip>
<remote-file>
Chapter 40 Command Examples
copy running-config tftp <ip> <remote-file>
The IP address of a TFTP server on which you want to store the
=
backup configuration file.
Specifies the name of the configuration file.
=
).
copy tftp config <index> <ip> <remote-file>
Specifies to restore which configuration file (1 or 2) on the switch.
=
The IP address of a TFTP server from which you want to get the
=
backup configuration file.
Specified the name of the configuration file.
=
GS-4024 User's Guide
) on the TFTP server
test.cfg
255