1.4. Connecting the Computer
This printer supports USB 2.0 Full speed interface when the interface board is installed in the printer.
1. Check to be sure that the printer's power is OFF.
2. Connect the interface cable to the connector shown below.
1.4. Connecting the Cash Drawer
1. Check to be sure that the printer's power is OFF.
2. Insert the cable connector from the Cash Drawer to the area indicated by DM above until you
hear a clicking sound.
1.4.4 Connecting the Power
1. Attach the power cord to the back of the printer.
2. Plug the opposite end into a suitable grounded outlet.
|
10
OKIPOS 426S