Oki OKIPOS 426S User Manual page 70

Symbol
W
L
A
B
C
D
E
F
G
H
Note 1 Though you can print within the light shaded area (printable area), feeding may be
less accurate.
Note 2 The print quality on the last page is not warrantied.
Note 3 Printing out of the designated printing area may result in poor printing quality or
malfunction of the unit. Set the printing format cautiously.
Note 4 The horizontal perforated line should be placed in the middle of the sprocket hole
interval. A horizontal perforated line close to a sprocket hole may let the paper slip
off the holes, resulting in a paper jam.
Note 5 Auto parking function of Sprocket paper can operate up to 14".
Caution : Do not use labels or similar paper media.
Do not use any paper media such as label that does not have a smooth surface.
You may hear some abnormal noise if you use.
|
70 OKIPOS 426S
Designation
Paper width
Paper length
Heading position
Top margin (on the 1st page) 25.4mm (1 inch)
Bottom margin,
recommended
Bottom margin, printable
Top margin, recommended
Top margin, printable
Bottom margin,
recommended
Bottom margin, printable
I Unprintable left margin
J Unprintable right margin
Standard Value
76.2~215.9mm (3~8.5 inch)
76.2~355.6mm (3~14 inch)
The length must be the one obtained
via multiplying 25.4mm (1 inch) by an
integer
10.31mm (0.41 inch)
19.05mm (3/4 inch)
6.35mm (1.4 inch)
25.4mm (1 inch)
10.31mm (0.41 inch)
198mm (7.8 inch)
19.6mm (0.77 inch)
11.43mm (9/20 inch)
Paper width is 203.2mm (8 inch) or
less:
11.43~21.59mm (9/20~0.85 inch)
Paper width is 215.9mm (8.5 inch):
20.39~21.59mm (0.8~0.85 inch)