Table of Contents
Advertisement
7.1.. Using Paper Size that is 187.96 mm (7.4") or more and less than 1.9 mm (8.") in width
Custom Size is variable in width in the range of 187.96 mm (7.4") - 215.9 mm (8.5"), but when
the designated width is more than 187.96 mm (7.4"), you must take the following points into
consideration when creating print data.
The printer's physical printable area is 160.02 mm (6.3").
The value that is set at Left Margin/Page Setup in the application is treated as the distance from
the printer's print start position (left edge).
greater than 0, the printing area shifts to the right in actual printing by as much as the set value.
Therefore, you need to adjust the printing position appropriately by setting the left margin at 0 so
that the right edge of the data you want to print does not go beyond the printable area, and also
by setting ample distance for the right margin.
1
Minimum left margin
2
Paper Size 187.96mm (7.4 inch)
3
Right Margin 27.94mm (1.1 inch) or more
4
Left margin displayed in application
5
Printable Maximum Width 160.02mm (6.3 inch)
6
Slip Tray Left Side
7
The left margin is reflected in relation to the print start position; thus, the print start position
shifts.
8
Slip Tray Right Side
9
Print Start position
10 Paper Guide
In other words, if the value set at Left Margin is
1
4
ABCDEFGHIJKLM
7
ABCDEFGHIJK
9
6
2
3
5
10 8
|
User's Guide: English
10
Advertisement
Table of Contents
