Oki OKIPOS 426S User Manual page 62

Note 1 The height-width ratio must be 1 : 2/3 – 2.
Note 2 Use a flat sheet free of curls, bends (especially those on its edges), cambers,
wrinkles, etc. If a sheet is not flat, it may be contaminated with ink due to ink
ribbon contact.
Note 3 Wide paper with the left or right edge pasted should be printed carefully, since it
may twist during feeding.
Note 4 Only a multi-part slip can be used for printing. (Insert it from the front side of the
printer.)
Caution : Do not use labels or similar paper media.
Do not use any paper media such as label that does not have a smooth surface.
You may hear some abnormal noise if you use.
|
6 OKIPOS 426S