Print On A Cut-Sheet Media - Oki IP-7900-21 Advanced Operation Manual

<Procedure to suspend or stop printing>
R O L L E N D D E T E C T E D
P R I N T / C A N C E L
CANCE L
N O M E D I A L O A D E D
L O A D M E D I A

Print on a cut-sheet media

1
2
Wiping unit side
With pressing the media
edge guard's your side
part, move each media
edge guard.
Front cover
Protection bar
Capping unit side
The loss in print quality can be
compensated by pulling the media
by hand to keep it stretched during
printing.
Press the key.
C AN CEL
The printing is suspended and the following
message is displayed. Load the new media.
Remove the protection bar, and open the front
cover.
Move the media edge guards to each side.
Move the media edge guards to each side so that they
are not under the media.
With pressing the media edge guard's your side part,
move each media edge guard.
CAUTION
- Be sure to press the media edge guard on your side
when moving the media edge guards. You may get
injured if your finger slips while strongly pressing the
plate's edge.
43