Oki OKIPOS 426S User Manual page 71

5.7.5.3.2 Paper Quality
Paper of the following quality may be used.
Type
Single-part paper High quality paper
Multi-part paper
Note 1 Interleaved paper is a multi-part paper with carbons inserted between copies.
1 Paper smoothness must be 90 ~ 7 sec. for Beek and 75 ~ 300 sec. for Sheffield.
2 If you use paper other than that specified here, test it to verify that it prints without problems.
5.7.5.3.3 Paper Weight and Maximum Duplicating Quantity
The weight of paper usable for printing and max. duplicating quantity are shown in the table below.
Type
Single-part High quality paper 52~81 g/m
paper
Multi-part Pressure-sensitive
paper paper, Carbon-
lined paper
Interleaved
paper(1)
Note 1 The thickness of carbon paper used for Interleaved paper must be 0.03 mm or less.
Pressure-sensitive paper, Carbon-lined paper or Interleaved
(1)
paper
Paper Quality
34~40 g/m
38~45 g/m
Carbon 34 g/m
Paper Quality
Weight Max Copies
2
(14~21 lb)
2
(9~11lb) 4 copies
(original + 3
copies)
2
(10~12 lb) 3 copies
2
(9lb) (original + 2
copies)
Total Paper
Thickness
- -
0.27mm or less
User's Guide: English
|
71