Table of Contents
Advertisement
.. Starting
No.
1
All letters & rolling ASCII continuous printing
test (Receipt)
2
All letters & rolling ASCII continuous printing
test (Slip/Sprocket)
3
Sample data continuous printing test
(Validation)
4
Menu function (Receipt)
5
Hexadecimal dump (Receipt)
6
Platen maintenance mode
Notes:
1. To make the above modes are active, turn on the printer while pressing the switches
marked with a circle and releasing those with a cross.
2. No.2: Sprocket paper printing test is performed when the lever is on the Tractor side,
and Slip paper printing test when the lever is not on the Tractor side.
3. No. 3: if the lever is on the Tractor side, the printer starts up for normal printing with
the function disabled.
No. 1, 4, 5, and 6: the printer starts up with the function enabled regardless of the
lever position.
4. No. 1: printing width is as set in the Width of Roll Paper menu.
5. No.1 and 2: printing is suspended by pressing SW1. Pressing SW1 again restarts
printing.
6. No. 1-3 and 6: printing is suspended by opening the cover. Close the cover to restart
printing.
7. During any local function, lever operation causes media mismatch alarm (1). When
the lever is returned to the original position, the alarm is released to restart test
printing.
Local Functions
SW
SW
SW1
X
X
O
O
X
X
X
O
X
O
X
O
X
O
O
O
O
O
SW4
X
X
X
X
X
X
|
User's Guide: English
1
Advertisement
Table of Contents
