Oki OKIPOS 426S User Manual page 26

9. Printer feeds the paper into the printer when your computer sends data.
10. Preparation
1) Position the printer at the front edge of the support (this promotes the unrestricted flow of
paper into the printer), then place a stack of Sprocket (Tractor) Paper below the printer.
2) The standard height of desks on which the printer is installed should be 75cm. Paper should
be loaded in parallel with the paper running path wherever possible. The deviation to right
and left should be 5cm or less.
3) The ejected paper should be folded squarely on the floor to enable smooth paper conveyance.
Inappropriate paper setting may deteriorate print quality.
1 50mm or less
2 750mm
3 600mm or more
|
6 OKIPOS 426S
1
2
3