Installation Instructions - Extron electronics MTP 4T 15HD RS User Manual
Quad mtp twisted pair transmitter for vga and rs-232
Hide thumbs
Also See for MTP 4T 15HD RS:
- User manual (16 pages) ,
- Setup manual (1 page) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Installation instructions
Mount the MTP 4T 15HD RS in a rack as follows:
1.
If feet were installed on the bottom of the transmitter assembly, remove them.
2.
Attach the included rack/through-desk mounting brackets (part number 70-077-03) to
the unit using eight machine screws supplied with the mounting kit.
Optional Rack Mounting Bracket
Figure 1.
Attaching the Mounting Brackets
3.
Insert the unit into the rack and align the holes in the mounting brackets with the holes
in the rack. Use four machine screws to attach the brackets to the rack.
MTP 4T 15HD RS • Installation and Operation
5
Advertisement
Table of Contents
