Stwireless Connections - Alcatel Speed Touch Wireless User Manual

1 Speed Touch Wireless Quick Guide
1.2.2

STWireless Connections

You must connect
ADSL port (Line)
Power port (DC)
Turn on your
STWireless
18 / 362
The ADSL Port (Line)
"
The Power Port (DC).
"
After performing these steps you can turn on your STWireless.
Proceed then with connecting:
Your WLAN clients
"
Optionally the Ethernet Port (10Base T)
"
Use the included ADSL cable to wire the STWireless's Line port to
your ADSL wall outlet.
Refer to section 2.2 for more information.
Only use the included power adapter to source your STWireless.
The STWireless should be operated only from the type of power
source, indicated on its marking label.
Refer to section 2.3 for more information.
If you are not sure of the regional power conditions, check the
adapter's specifications in section F.3, and your local power
company.
Use the power switch on the STWireless back panel to turn on
your STWireless.
Refer to section D.3 for more information.
3EC 17766 AAAA TCZZA Ed. 01