7 Data Services - PPPoA to PPTP Relaying
7.5.5
PPTP Profiles
Introduction
PPTP profile selections
Creating a PPTP Profile
116 / 362
In most cases, the STWireless's PPP phonebook entries are ideally
suited to make PPPoA/PPTP connections over the ADSL line.
However, in case the remote access server demands specific
configurations for PPPoA/PPTP , you can easily configure a PPTP
profile via the CLI.
By default a 'default' profile exists, applicable for all PPP
phonebook entries. This default profile inhibits the following
settings:
Encapsulation method : VC MUX
"
HDLC framing : never
"
QoS : default.
"
A PPTP Profile can only be created and configured via the CLI. See
chapter 19 for more information on the CLI.
3EC 17766 AAAA TCZZA Ed. 01