Table of Contents
Advertisement
9.2.7
Example Configuration
Configuration figure
Local premisses
configuration
3EC 17766 AAAA TCZZA Ed. 01
The configuration of a Classical IP LIS is illustrated with the
following example:
192.168.0.2
255.255.255.0
0.0.0.0.->192.168.0.1
Subnet 10.1
192.168.0.1
255.0.0.0
10.0.0.0->172.16.1.1
Local Servers
In the drawing above a LIS, 172.16.1.x, represented by the
ellipse, runs between the STWireless (1) and the remote access
router (2).
At the local premisses an IP network, 10.x.x.x, is created.
An IP address is configured on the Ethernet port (10.0.0.138).
On the ADSL side of the STWireless (1) one CIP member is by
default enabled. This CIP member is configured with IP address
172.16.1.1 and is part of the LIS 172.16.1.x.
One VC in the STWireless (1) phonebook (CIPPVC1), is explicitly
assigned to this CIP member. This VC(8/80) is cross connected to
the remote destination.
9 Data Services - Classical IP & IP Routing
8/80
LIS 172.16.1.x
2
172.16.1.1
172.16.1.2
255.255.255.0
255.255.255.0
Symbolizes an VP/VC cross-connect
10.0.0.1
255.0.0.0
10.0.0.138<-0.0.0.0
8/80
1
10.0.0.138
255.0.0.0
172.16.1.2<-0.0.0.0
10.0.0.2
255.0.0.0
10.0.0.138<-0.0.0.0
159 / 362
Advertisement
Table of Contents
