Alcatel Speed Touch Wireless User Manual page 321

C.5 Configuring RAS for PPTP Tunneling (WinNT)
Procedure
3EC 17766 AAAA TCZZA Ed. 01
Proceed as follows:
Step Action and Description
1 After the 'Installing the PPTP Tunneling Network Protocol' procedure,
the 'Remote Access Setup' window pops up.
Click
configuration.
In the example window, one (voiceband) modem is shown, which
already was configured for RAS.
2 The 'Add RAS Device' window pops up.
You must add each port individually. To do so, double click on the
correct port and click
The 'Remote Access Setup' window reappears, now with the VPN
3
port added to the device list.
Repeat steps 1 and 2 until all VPN ports are listed in the 'Remote
Access Setup' window.
At this point the ports are configured by default for dial in only. To
4
change this, select a port in the 'Remote Access Setup' window and
click
AppendixC Microsoft Dial Up Networking
to add new created VPN ports to the RAS
321 / 362