Ppp & Ip Routing And Ip Addresses - Alcatel Speed Touch Wireless User Manual

11.2.4 PPP & IP Routing and IP Addresses
IP routing and IP
addresses
STWireless IP
addresses
PC IP address
configuration
Default gateway for
the PCs
PPP & IP routing
PPP IP address
negotiation
NAPT
3EC 17766 AAAA TCZZA Ed. 01
Local IP addresses must be configured prior to use IP routing.
As the STWireless has a preconfigured Net10" address
(10.0.0.138), you can configure IP addresses like 10.0.0.1,
10.0.0.2, ... in your PCs, or use the STWireless DHCP server.
In case another IP address is required, you can set STWireless's
IP address via the STWireless web pages, or via a Ping of Life .
See sections 11.3 and 17.1 for more information.
The PC IP address can be configured statically (no DHCP), or
dynamically (STWireless as DHCP server).
In addition, configure the STWireless's IP address as default
gateway in your PCs.
At the ADSL side of the STWireless IP router, PPP automatically
negotiates an IP address with its remote PPP peer. Via NAPT, both
Private and Public IP addresses can coexist in the router.
You can configure the PPP local IP address of the STWireless. In
special circumstances, you can configure a remote IP address for
the PPP connection.
See subsection 8.4.5 for more information.
NAPT is enabled by default on PPP connections. In case your
(W)LAN uses Public IP addresses, NAPT is not required.
See subsection 8.4.6 for more information.
11 Networking Services - IP
207 / 362