Changing The Filter Paper - Frymaster G18FB Series Installation & Operation Manual

CHANGING THE FILTER PAPER

DANGER
Allow the filter pan to cool completely
before attempting to change the paper.
1. Slide the filter unit from the cabinet. If so
equipped, remove the filter pan lid. Re-
move and clean the crumb tray.
2. Remove the hold-down ring from the filter
pan and clean.
3. Remove and discard the used filter paper.
G18FB & G24FB SERIES GAS FRYERS
CHAPTER 4: FILTRATION INSTRUCTIONS
4. Remove the metal filter screen and clean
thoroughly using a solution of hot water
and detergent. Allow the screen to dry
completely before reinstalling. Clean all
breading and food particles from the filter
pan, then replace the filter screen in the
bottom of the pan.
Make sure the inside of the pan is free
of all food and breading particles that
could prevent the paper from sealing
against the bottom of the pan.
5. Lay a sheet of filter paper over the top of
the filter pan with the paper overlapping
on all sides. Position the hold-down ring
over the filter paper on top of the pan and
lower the ring into the pan, allowing the
filter paper to fold up around the ring as it
is pushed to the bottom of the pan.
4-6
CAUTION