Current Time (Clock Displays) Adjustment; Replace Lithium Battery - Panasonic SD-PPG100 Operating Instructions Manual

Control panel (The LCD display will disappear when the power cord is unplugged.)
(Raisin)
Put in raisins and other
ingredients (P. EN18
(Menu)
Select menu
Current time (clock displays)
adjustment
Pull out the insulating film in advance (P. EN6)
The time is displayed in the 24 hour system.
Plug in
* You cannot adjust time if it is not plugged in.
Press (H) or (M)
Release fingers when a beep
sound is heard.
Adjust time
* Adjust time when flashing
(E.g. adjust the time to 3:30 p.m.)
( )
Hold for fast
forward
Completed when flashing stops.
Pull out the plug
* Time adjustment cannot be completed if you
pull out the power plug before the flicker stops.
EN19)
Menu
(Crust colour)
Change crust colour (P. EN20)
(time display flashes)
(Hour / minute)
Set timer (P. EN20)
Adjust current time (See below)
Set cooking time (P. EN56, EN58)
(Timer)
Setting timer for completion timer (P. EN20)

Replace lithium battery

* Use the lithium battery to enable the bread maker to
memorize current time and previous settings.
Take out the battery base.
Secure the battery with left hand by
holding the base in front. Take out the
battery.
Lithium battery
Turn the battery base upside down and
install the battery. Install the battery
base back in the main unit.
Lithium battery
( )
Anode facing
downwards
Turn over the
battery base
* Please confirm that the battery does not drop down.
* Baking can be started even if the lithium battery is not installed.
* Battery working life is about 2 years.
(Start)
Start baking or
timing
(Cancel)
Reset
Stop after baking
is started (Hold)
Battery base
Install the
lithium battery
with anode
facing upwards
EN7