Cut - Akai DPS24 Operator's Manual

NOTE : It is possible to copy edits between projects. Select the track(s) you want to edit, mark your edit
region and press COPY. Now load the project you want to place the edit in, select the destination tracks and
locate to the position you want the edit to be placed and use the PASTE or INSERT function (explained later) to
place the region in that project.
CUT and ERASE also copy the region to the clipboard so you can place audio regions you remove in other
projects as well.

CUT

Pressing COPY [F6] will copy the region to the clipboard from where it may be subse-
quently pasted and/or inserted elsewhere in the project.
AUTOMATION EDIT [Q5] allows you to also copy the automation for that region. The
default is SELECTED and automation data for the selected track(s) will be carried with
the audio edit.
Pressing CUT will show this prompt:
Pressing CUT will remove the selected IN/OUT region to the clipboard and close the
gap, shifting all subsequent audio backwards. As with all the other functions, a simple
graphic depiction of the edit is shown.
EDIT
47