To edit the value you can.....
•
Enter a number directly using the numeric keypad
•
Use the numeric keypad's +/- keys to nudge values
•
Use the Q6 as a typical DATA ENTRY encoder
In this example, however, you would probably prefer to use the Q-CHANNEL function to set the functions shown.
Some pages, however, have quite a lot of fields and unfortunately, there is no option but to cursor around them and
use the numeric keypad's DATA +/- keys to set values. An example of this would be the PATCH pages:
However, there are not that many pages like this and also, these are the kind of pages which, once set, do not require
constant usage after that. For the most part, parameters are set using dedicated controls in the form of either the Q-
LINK controls, the Q-STRIP/CHANNEL encoders of dedicated control surface switches.
SCREEN CONVENTIONS
35