DSP
DSP MODE
Pressing SHIFT+EDIT gives access to the off-line DSP functions:
As you can see, the screen layout is virtually identical to the main real-time EDIT screen.
Operation is also the same....
Jog over the point where you want the off-line edit to start and mark an IN point as appropriate. Do the same to mark
the OUT point.
Once you are happy with the edit region you have created, you can select the DSP function you wish to apply to it.
This will pop-up a window where you can set parameters appropriate to the selected DSP function using the Q-Link
controls.
NOTE : One important difference between the two edit modes, however, is that a maximum of two tracks can
be edited using the DSP functions and it is not possible to subject more than two tracks to the DSP processes.
51