Akai DPS24 Operator's Manual page 80

PATCH
DISK RECORD GROUP ASSIGN allows you to select which groups the 24 disk tracks will be routed to and any
track may be assigned to groups 1-8. As with the input channels, that routing is done in pairs. Regarding the NOTE
above, you may find it easier to assign disk tracks to groups in the same way.
FX RTN GROUP ASSIGN allows you to select which groups the internal effects returns will be routed to. Regarding
the NOTE above, you may find it easier to assign disk tracks to groups in the same way.
NOTE : You can only route any channel to one group at a time. For example, you cannot route Input 1 to
Group 1/2 and Group 3/4.
Pressing L/R shows this screen:
This page allows you to route channels to the stereo L/R bus. All channels (inputs, disk tracks, FX return and
group outputs) can be assigned to the stereo L/R bus. The options here are simple - off (- - - -) or L/R.
As with the group assignments, you may find it easier to route channels to the stereo L/R bus using the control
surface's dedicated keys.
PATCH PRESETS [F5/6] provide access to patch presets and pressing it shows this pop-up:
72