Akai DPS24 Operator's Manual page 69

NOTE : By default, the FX/AUX sends for the FX return channels are switched off. This helps conserve mixer
processing. However, you may switch these on if you need to send effects to other effects channels.
GROUPS
The soft key functions on the CHANNEL page are:
EXIT
DYN
NAME
COPY
FLAT EQ
INIT
When a pair of sends are configured as a stereo send, the display changes.
Here, AUX 3 and 4 are configured as a stereo send feeding the STUDIO outputs to
facilitate a foldback mix for monitoring in a separate record area. For further informa-
tion on setting up the FX/AUX routings, please refer to the relevant section later in this
manual.
Under the FX/AUX send section, you can see the group assignment for the selected
channel. These may be changed here or in the PATCH pages or more conveniently di-
rectly on the console.
Takes you back to the main MIXER page.
Takes you to a page where you can set the channel's dynamics processor (see next).
Pops up a prompt where you can name the selected channel in the usual way.
Allows you to copy the settings of one channel to another.
Will flatten the EQ but will leave other channel parameters intact.
Will initialise the selected channel(s) parameters to flat settings.
MIXER
61