Toyota Land Cruiser 200 2010 Owner's Manual page 526

5-2. Steps to take in an emergency
STEP 4
STEP 5
Stowing the flat/spare tire, jack and tools
STEP 1
STEP 2
Raise the tire.
Pull the tire towards the rear of the vehicle when raising. After
raising, visually check that tire is not interfering with compo-
nents.
STEP 3
Stow the tools and jack securely, and replace all covers.
526
L/C200_U (OM60G31U)
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
97 ft•lbf (131 N•m, 13.4 kgf•m)
Reinstall the wheel ornament.
Lay down the tire with the outer
side facing up, and install the
holding bracket.
ITY52C033