Toyota Land Cruiser 200 2010 Owner's Manual page 405

■
Before programming
●
Install a new battery in the remote control transmitter.
●
The battery side of the remote control transmitter must be pointed away
from the HomeLink
■
Certification for the garage door opener
FCC ID: CB2070NHL4
This device complies with FCC rules part 15 and Industry Canada RSS-210.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any interfer-
ence that may be received including interference that may cause undesired
operation.
WARNING: The transmitter has been tested and complies with FCC and IC
rules. Changes or modifications not expressly approved by the party respon-
sible for compliance could void the user's authority to operate the device.
The term "IC:" before the certification/registration number only signifies that
Industry Canada technical specifications were met.
■
When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.
CAUTION
■
When programming a garage door or other remote control devices
The garage door or other devices may operate, so ensure people and
objects are out of danger to prevent potential harm.
■
Conforming to federal safety standards
Do not use the HomeLink
opener or device that lacks safety stop and reverse features as required by
federal safety standards.
This includes any garage door that cannot detect an interfering object. A
door or device without these features increases the risk of death or serious
injury.
L/C200_U (OM60G31U)

button.

compatible transceiver with any garage door
3-7. Other interior features
405
3