Toyota Land Cruiser 200 2010 Owner's Manual page 434

4-3. Do-it-yourself maintenance
■
Engine oil consumption
●
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
●
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
●
A new engine consumes more oil.
●
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level accu-
rately.
●
Oil consumption: Max. 1.1 qt./600 miles (0.9 lmp.qt./600 miles, 1.0 L per
1000 km)
●
If you consume more than 1.1 qt. (1.0 L, 0.9 lmp.qt.) every 600 miles
(1000 km), contact your Toyota dealer.
■
Resetting the engine oil maintenance data
The oil change system should be reset. Perform the following procedures:
STEP 1
Switch the display to the trip meter A when the engine is running.
(P. 167)
STEP 2
Turn the "ENGINE START STOP" switch OFF.
STEP 3
While pressing the trip meter reset button, set the "ENGINE START
STOP" switch to IGNITION ON mode (but do not start the engine
because otherwise the reset mode will be cancelled). Continue to
press and hold the button until the multi-information display indi-
cates that the reset is complete.
434
L/C200_U (OM60G31U)